Correcting Image Shape with Arc Correction

You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
  1. Turn on the projector and display an image.
    Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
  2. Press the Menu button.
  3. Select the Settings menu and press Enter.


  4. Select the Geometric Correction setting and press Enter.
  5. Select the Arc Correction setting and press Enter. Then press Enter again. You see the Arc Correction adjustment screen.


  6. Use the arrow buttons on the projector or the remote control to select the corner or side of the image you want to adjust. Then press Enter.
  7. Press the arrow buttons to adjust the image shape as necessary.
  8. When you are finished, press Esc.
Related tasks
Displaying a Test Pattern
Related references
Projector Feature Settings - Settings Menu