You
can use the projector's Point Correction feature to fine-tune the
image shape using points on a grid.
Turn on the projector and display an image.
Note: You can
display a pattern to aid in adjusting the projected image using the
Settings menu.
Press the Menu
button.
Select the Settings menu and
press Enter.
Select the Geometric
Correction setting and press Enter.
Select the Point Correction
setting and press Enter.
Note: If you see a
confirmation message, press Enter.
You see this screen:
Select the Point Correction
setting and press Enter.
Select the number of grid lines to display and press
Enter.
Note: If you need
to change the color of the grid lines, select the Pattern Color setting and select a suitable
color.
Use the arrow buttons on the projector or remote control to
move to the point on the grid that you want to adjust. Then press
Enter. The box changes from a
single line to a double-lined square.
Use the arrow buttons to correct the image shape in all
necessary directions.
Note: You can
press Enter to show or hide the
image and grid to check the results.
Press Esc to return to the
previous screen and select another point to correct, if
necessary.