Projector Setup Settings - Extended Menu

Settings on the Extended menu let you customize various projector setup features that control its operation.



Setting Options Description
Display — See the next table in this topic
Closed Caption Off

CC1

CC2

Controls use of closed captions and selects the closed caption type (closed captions are only visible for NTSC signals connected through the S-Video or Video ports)
User's Logo — Creates a screen that the projector displays to identify itself and enhance security
Projection Front

Front/Ceiling

Rear

Rear Ceiling

Selects the way the projector faces the screen so the image is oriented correctly
Operation — See the last table in the topic
A/V Settings A/V Output

Monitor Out

Audio Settings

Selects various audio and video output settings

A/V Output: select this setting to output audio and video to an external device when the projector is in standby mode (Standby Mode must be turned on to use this setting)

Monitor Out: Select the image source to output to an external device when the projector is in standby mode. When set to Auto, an analog RGB signal from the Computer or BNC port is output depending on which source was selected when the projector went into standby mode.

Audio Settings: Selects audio source to output
Standby Mode Communication On

Communication Off

Enable this setting to allow the following operations to occur when the projector is in standby mode:
  • Monitor and control the projector over a network
  • Output audio and video to an external device (A/V Output must be set to Always On)
Multi-Projection Multi-screen

Projector ID

Select options when projecting from multiple projectors

Multi-screen: adjusts the tint and brightness of each projected image

Projector ID: sets the projector to a particular ID number which allows you to use a remote control to individually control projectors
Schedule Settings — Schedule specific operations to occur at a pre-scheduled time
Language Various languages available Selects the language for projector menu and message displays (not changed by Reset option)

Display settings

Setting Options Description
Menu Position — Selects the position of the projector menu displayed on the screen
Messages — Controls whether messages are displayed on the screen
Display Background — Selects the screen color or logo to display when no signal is received
Startup Screen — Controls whether a special screen appears when the projector starts up
A/V Mute — Selects the screen color or logo to display when A/V Mute is turned on
Air Filter Notice — Displays a message when a clog in the air filter is detected
Screen — Sets the aspect ratio and position of the projected image according to the type of screen being used
Panel Alignment — Corrects color misalignment in the projected image
Color Uniformity — Adjusts the color tone balance

Operation settings

Setting Options Description
Direct Power On — Turns on the projector when you plug it in
Sleep Mode — Automatically places the projector in standby mode after an interval of inactivity
Sleep Mode Timer — Sets the time before the projector automatically turns off (Sleep Mode must be turned on)
A/V Mute Timer On

Off

When set to On, the projector turns off automatically after 30 minutes when using A/V mute
High Altitude Mode — Regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m)
Remote Control Type Normal

Simple

Select Normal to use the remote control that came with the projector or Simple to use a different Epson projector remote control; selecting Simple disables the remote control that came with the projector
Inv Direction Button — Enable this setting if the projector is installed on a ceiling to invert the projector's control panel navigation buttons
Startup Source Search — Automatically detect the image signal that is input when the projector is turned on
A/V Mute Release A/V Mute

All

Select A/V Mute if you want to use only the A/V Mute button to turn off A/V mute mode, or select All to use any button to turn it off
Beep — Turns on or off the beep that is played when the projector turns on or off
Date & Time — Adjusts the projector's system time and date settings
Parent topic: Adjusting the Menu Settings