Installing the Wireless LAN Module

To use the projector over a wireless network, install the optional Epson 802.11b/g/n wireless LAN module. Do not install any other type of wireless LAN module.
Caution:
Never remove the module while its indicator light is green or flashing, or while you are projecting wirelessly. You may damage the module or lose data.
  1. Turn off the projector and unplug the power cord.
  2. Slide the air filter cover latch and open the air filter cover.


  3. Loosen the screw securing the wireless LAN module cover, then remove the cover.


  4. Insert the wireless LAN module into the port.


  5. Replace the wireless LAN module cover and secure it using the screw you loosened.


  6. Close the air filter cover.
  7. Plug in and turn on the projector.
Related references
Optional Equipment and Replacement Parts