You can use
the Quick Wireless Connection USB key to quickly connect your
computer to the projector wirelessly. Then you can project your
presentation and remove the key when you are done.
Note: Make sure
the wireless LAN module is installed.
Turn on
the projector.
Press
the LAN button on the remote
control. You see a screen like this:
Verify
that an SSID and IP address are displayed, then remove the wireless
LAN module from the projector.
Insert
the Quick Wireless Connection USB key into the same port used for
the wireless LAN module.
You see a projected message that the network information update is
complete.
Remove
the USB key.
Reinsert
the wireless LAN module into the projector.
Connect
the USB key to a USB port on your computer or laptop.
Note: In Windows
Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then select Allow on the next screen.
Follow
the on-screen instructions to install the Quick Wireless Connection
driver.
Note: If you see a
Windows Firewall message, click Yes
to disable the firewall for this application.
After a few minutes, your computer image is displayed by the
projector. If it does not appear, press the LAN button on your remote control or restart
your computer.
Run your
presentation as necessary.
When you
finish projecting wirelessly, select the Safely Remove Hardware option in the Windows
taskbar, then remove the USB key from your computer.
Note: You may need
to restart your computer to reactivate your wireless LAN
connection.
