If spots or lines appear in all your scanned images, follow
these steps to clean the scanner glass:
- Turn off the
scanner.
- Unplug the
AC adapter.
- Disconnect
any connected cables.
- Pull down on
the cover open lever and open the scanner cover.
- Wipe off any
stains on the glass scanning surfaces using a soft, dry cloth.
Note: If the glass
surfaces are stained with grease or some other hard-to-remove
material, use a small amount of glass cleaner on a soft cloth to
remove it. Wipe off all remaining liquid.
Caution:
Do not spray glass cleaner directly on the
scanning surfaces. Be careful not to place too much force on the
glass.
- Close the
scanner cover.
- Plug in the
AC adapter.