You can load
paper up to this size in the lower paper cassette: Legal (8.5 × 14 inches
[216 × 357 mm]).
Note: Do not
remove or insert the paper cassette during printing.
Close the output tray, if necessary.
Note: As you
slide in the output tray, there may be slight resistance and noise.
This is normal.
Open the front cover.
Pull on the front cover to pull out the lower paper
cassette.
Slide the edge guides outward.
Note: If you
are using legal-size paper, remove the CD/DVD tray from the
product. Press the button on the cassette and then extend it as
shown.
Set the front edge guide to the paper size you are
using.
Note: Various
paper sizes are marked on the tray.
Insert paper with the glossy or printable side
facedown.
Note: Make
sure the paper is loaded against the edge guide and not sticking
out from the end of the cassette.
Slide the side edge guides against the paper, but not too
tightly.
Note: Make
sure the paper is under the tabs on the edge guides.
Keep the cassette flat as you insert it.
Note: Leave
enough space in front of the product for the paper to be fully
ejected. Do not remove or insert the paper cassette while the
product is operating.
Always follow
these paper loading guidelines:
Load only the
recommended number of sheets.
Load paper short
edge first and printable side facedown.
Make sure the
paper is under the tabs on the edge guides and not sticking out
from the end of the cassette.
Check the paper
package for any additional loading instructions.