Blue |
Blue |
Off |
Off |
Normal operation |
Blue |
Flashing blue |
Off |
Off |
Warming up or cooling down |
Blue |
Off |
Off |
Off |
Standby or sleep mode |
Flashing blue |
Light status varies |
Light status varies |
Flashing orange |
Projector is too hot.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
Make sure
the environmental temperature is not too hot.
|
Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off. Leave
it turned off to cool down. Once the Temp and Status lights turn
off and the power light turns blue (after about five minutes), try
the suggestions below:
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Off |
Flashing blue |
Orange |
Off |
Lamp has a problem.
-
Check to
see if the lamp is burned out, broken, or installed incorrectly.
Reseat or replace the lamp as necessary.
-
Clean or
replace the air filter.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Flashing blue |
Light status varies |
Flashing orange |
Light status varies |
Replace the lamp soon to avoid damage. Do not
continue using the projector. |
Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson for help. |
Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error. Turn the projector
off, unplug it, and contact Epson for help. |
Off |
Flashing blue |
Flashing orange |
Flashing orange |
Auto iris error. Turn the projector off, unplug
it, and contact Epson for help. |
Off |
Flashing blue |
Orange |
Orange |
Power error. Turn the projector off, unplug it,
and contact Epson for help. |