If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code.
Event ID code | Cause and solution |
---|---|
0432 | The EasyMP Network Projection program did not start. Turn the projector off and then on again. |
0435 | |
0434 | Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. |
0481 | |
0482 | |
0485 | |
0433 | Cannot display the transferred images. Restart the EasyMP Network Projection program. |
0484 | Communication with computer was disconnected. Restart the EasyMP Network Projection program. |
0483 | The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. |
04FE | |
0479 | A projector system error has occurred. Turn the projector off and then on again. |
04FF | |
0891 | Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. |
0892 | The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. |
0893 | The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. |
0894 | Communication with unauthorized access point was disconnected. Contact your network administrator. |
0898 | Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. |
0899 | A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. |