Place Photos on the Scanner Glass

You can place one or two photos on the scanner glass and then copy, fax, or scan them.

1.	Open the document cover.

2.	Place your original photo face-down on the scanner glass with the top against the back left corner.

Note:
If the edges of your photo are cut off, move the photo 1/4 inch (5 mm) away from the corner of the scanner glass. If you are using the Copy/Restore feature, you can copy two 4 × 6-inch photos; place them as shown below and at least 1/4 inch (5 mm) apart.

3.	Close the document cover gently to keep your photo in place.

Once the original document is loaded, you can copy, scan, or fax.

 

See also:

Place Documents on the Scanner Glass

Place Documents in the Automatic Document Feeder

Place CDs/DVDs on the Scanner Glass