Fax a Document or Photo : Set Up Your Fax Features

Select Communication Settings
Use these settings to change how your Artisan 810 Series receives and transmits faxes.
Press the Home button, then select Setup.
Press  or , then select Fax Setting.
Press  or , then select Communication.
All (default)
Double & Triple
This feature can be used with a “Distinctive Ring Service” provided by your phone company. With this service, you can have two or more phone numbers assigned to the same line, with each number given a distinctive ring. For example, if you have a phone number for personal calls that’s set to ring normally (with a single ring) and a fax number set for a double ring, select Double as the DRD setting. Then the fax system picks up only those calls with a double ring.
On (default)
Indicates whether you use Error Correction Mode to automatically request retransmission of fax data that is received with detected errors.
On (default)
Indicates the speed at which you transmit faxes.
On is 33.6 Kbps and Off 14.4 Kbps.
Rings to Answer
4 (default)
1, 2, 3, 4, 5, 6, 7, 8, or 9
Indicates the number of rings that must occur before the Artisan 810 Series automatically receives a fax. You may want to change this setting if you have connected a telephone or answering machine.
Dial Tone Detection
On (default)
When this setting is on, the Artisan 810 Series dials automatically when it detects a dial tone.
It may not be able to detect a dial tone when connected to a PBX (Private Branch Exchange) or TA (Terminal Adapter) system. In that case, turn this setting off.