You
can use the projector's keystone correction buttons to correct the
shape of an image that is unevenly rectangular on the sides.
Note: The
horizontal and vertical correction angle should be no more than ±
3º, with keystone correction up to ± 6.
Turn on the projector and display an image.
Note: You can
display a pattern to aid in adjusting the projected image using the
Settings menu.
Press one of these keystone buttons on the control panel to
display the Keystone adjustment screen.
Press a keystone button on the projector's control panel to
adjust the image shape.
Note: The
horizontal keystone adjustment buttons are labeled Wide and Tele.
After correction, your image is slightly smaller.
Note: If the
projector is installed out of reach, you can also correct the image
shape with the remote control using the Keystone settings in the
projector menus.