Wireless LAN Menu Settings

Note: See your projector's EasyMP Network Projection Operation Guide for details on selecting these settings.
Setting Options Description
Wireless LAN Power On


Turns on wireless LAN support
Wi-Fi Protected Setup To Setup Wizard Select To Setup Wizard to start the WPS Connection Setup utility
Wireless LAN System 802.11b/g


Sets the type of wireless LAN system the projector is connecting to
Connection Mode Quick


Selects the type of wireless connection:

Quick: lets you quickly connect to one computer or use the optional Quick Wireless Connection USB key to connect

Advanced: lets you connect to multiple computers via a wireless network access point

SSID Auto Setting On


Turns on automatic SSID searching in Quick connection mode; set to Off when connecting to multiple projectors at the same time
SSID Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is connecting to
Search Access Point To Search View Search for available wireless network access points in Advanced connection mode
Channel 1ch



In Quick connection mode, selects the frequency band (channel) used by the wireless LAN
SSID Display On


Selects whether to display the SSID on the network standby screen


Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address
WINS server IP address Sets the IP address for the network folder where images are saved; this setting is used (instead of the UNC address) when the folder is on a different network segment from the projector
IP Address Display On


Selects whether to display the IP address on the network standby screen