You can use
the optional Quick Wireless Connection USB Key to quickly connect
the projector to a Windows computer wirelessly. Then you can
project your presentation and remove the key when you are
the USB key to the projector's USB-A
Note: If the
control pad is connected to the projector, you can also connect the
USB key to the USB-A port on the
control pad, as shown:
You see a projected message that the network information update is
the USB key.
connect the USB key to a USB port on your computer or
Note: In Windows
Vista, if you see the AutoPlay window, select Run LaunchU3.exe, then select Allow on the next screen.
the on-screen instructions to install the Quick Wireless Connection
Note: If you see a
Windows Firewall message, click Yes
to disable the firewall.
After a few minutes, your computer image is displayed by the
projector. If it does not appear, press the Source Search button on your projector remote
control and select the LAN source,
or restart your computer.
presentation as necessary.
finish projecting wirelessly, remove the USB key from your
Note: You may need
to restart your computer to reactivate your wireless LAN