Connecting a Printer to the Control Pad
You can connect a printer or all-in-one device to the
Printer
port on the control pad and use it to print your projected and annotated content.
Note:
Make sure the printer meets the control command requirements.
Make sure a USB cable is connected between the
USB-A
port on the projector and the
USB-B
port on the control pad.
Connect another USB cable to the
Printer
port on the control pad. Make sure the cable is no longer than 16.4 ft (5 m).
Connect the other end of the cable to the USB type B port on the printer.
Parent topic:
Setting Up the Projector
Related references
Printer and All-in-One Control Command Requirements