Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides.
Note:
For interactive use, make sure the degree of horizontal and vertical keystone correction is no more than ± 6º.
Turn on the projector and display an image.
Note:
You can display a pattern to aid in adjusting the projected image using the Settings menu.
Press one of these keystone buttons on the control panel to display the Keystone adjustment screen.
Press a keystone button on the projector's control panel to adjust the image shape.
Note:
The horizontal keystone adjustment buttons are labeled
Wide
and
Tele
.
After correction, your image is slightly smaller.
Note:
If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus.
Parent topic:
Image Shape
Related references
Projector Feature Settings - Settings Menu