Cleaning the Epson Stylus CX

To keep your Epson Stylus CX all-in-one working at its best, you should clean it several times a year.

  1. Turn off the Epson Stylus CX, unplug the power cord, and disconnect the USB cable.
  2. Remove all the paper, then use a soft brush to clean the sheet feeder.
  3. If the glass surface of the document table is dirty, clean it with a soft dry cloth, or use a small amount of glass cleaner on a soft cloth to clean it. Do not spray glass cleaner directly on the glass.
  4. If the outer case or inside of the sheet feeder is dirty, clean it with a soft cloth dampened with mild detergent. Keep the scanner section closed to prevent water from getting inside.
  5. If ink accidentally gets inside the printer, wipe it off with a damp cloth.



    6. Warning:
    Don't touch the gears or any other parts inside the Epson Stylus CX.

    Caution:
    Never use a hard or abrasive brush, or benzine, alcohol, or paint thinner for cleaning; they can damage the Epson Stylus CX components and case.

    Don't get water on the Epson Stylus CX components and don't spray lubricants or oils inside the Epson Stylus CX.