|
•
|
If the paper doesn’t eject fully, you may have set the wrong paper size. Press the OK button to eject the paper, and then select the correct paper size.
|
|
•
|
If paper doesn’t feed, remove it from the sheet feeder. Flip through the stack to separate the sheets a little. Then reload it against the right edge, behind the tabs, and slide the left edge guide against the paper (but not too tightly). Make sure the paper is not in front of the feeder guard.
|
|
•
|
If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.
|
|
•
|
Don’t load too many sheets at once (up to 20 sheets of photo paper or 100 sheets of plain paper). See Special Papers for details.
|
|
•
|
Heavily saturated prints may curl, causing a paper jam when printing on both sides of the paper.
|
|
•
|
If paper is jammed, you see the message Paper jam on the display. Follow these steps to clear the jam:
|
|
1.
|
Press the OK button to eject the jammed paper. If the jammed paper is not ejected, go to the next step.
|
If the paper is stuck inside the Epson Stylus CX5800F, press the 
On button to turn it off. Open the scanner and remove any paper inside, including any torn pieces. Do not pull it backward however; this can damage the sheet feeder. Close the scanner, then turn the Epson Stylus CX5800F back on.
On button to turn it off. Open the scanner and remove any paper inside, including any torn pieces. Do not pull it backward however; this can damage the sheet feeder. Close the scanner, then turn the Epson Stylus CX5800F back on.|
•
|
Place the paper against the right edge behind the tab. Slide the left edge guide against it, but not too tightly.
|