Specifications

Specifications
For details about PictureMate and using it with a computer, see these sections:
System Requirements
To use PictureMate with your computer, your system must meet the requirements below.
Windows System Requirements
A Microsoft® Windows compatible PC with a processor speed of 800 MHz or faster
512MB RAM for Windows Vista (1GB recommended)
4¥ or faster CD-ROM or DVD drive for installing the software
Caution: Using an improperly shielded USB cable—especially a cable more than 6.5 feet (2 meters) long—may cause PictureMate to malfunction.
Macintosh System Requirements
An Apple® Macintosh® with a Power PC® or Intel® processor
Mac OS® X 10.2.8, 10.3.9 to 10.4.x
4× or faster CD-ROM or DVD drive for installing the software
Caution: Using an improperly shielded USB cable—especially a cable more than 6.5 feet (2 meters) long—may cause PictureMate to malfunction.
Technical Specifications
Printing
EPSON ESC/P® raster
Paper
Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper.
4 × 6 inches
Caution: Don’t load plain paper; this may cause damage to PictureMate.

Do not load curled or folded paper.
Photo Cartridge
(Included in each PictureMate 200 Series Print Pack)
4 to 104 °F (–20 to 40 °C)*
* Ink freezes at 5 °F (–15 °C). It thaws and is usable after approximately 3 hours at 77 °F (25 °C).
Caution: To ensure good results, use a genuine Epson PictureMate 200 Series photo cartridge and do not refill it. Other products may cause damage to your printer not covered by Epson’s warranty.

Do not use a photo cartridge if the date on the package has expired.

Do not leave a photo cartridge or PictureMate exposed to heat or direct sunlight.
Mechanical
Height: 10.5 inches (266 mm) for PictureMate Dash or 11.6 inches (295 mm) for PictureMate Zoom
Electrical
100 to 120 V or 220 to 240 V
23 W
23 W
5.0 W
5.6 W
0.4 W
0.4 W
Note: Check the label on the bottom of PictureMate for voltage information.
AC Adapter
42 W
20 VDC, 1.68 A
Environmental
Storage: –4 to 140 °F (–20 to 40 °C)
Memory Card Slots
Compatible with “CF+ and CompactFlash Specification 2.0”
Sony® Memory Stick/MemoryStick PRO/ Duo (requires adapter) card slot
Compatible with “Memory Stick Standard version 1.40-00”
Compatible with “Memory Stick Standard Memory Stick PRO Format Specifications version 1.01-00”
SD (Secure Digital)/MMC (MultiMediaCard) card slot
Compatible with “SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0”
Compatible with “MultiMediaCard System Specifications Version 3.31 cards”
Compatible with “xD-Picture Card Card Specification Version 1.20 Type M Card/Type H Card”
Voltage requirements
Computer USB Interface
Recommended cable length
External Device Interface
Recommended cable length
* Not all USB devices are supported. Contact Epson for details. See Where To Get Help.
Standards and Approvals