| (E-01) |
A fatal error has occurred. Turn the product
off and then back on again. If the error continues, check for a
paper jam. If there is no paper jam, contact Epson for
support. |
| (W-02) |
Paper is jammed in the product. Remove the
jammed paper, then turn the product off and back on again. |
| (W-03) |
Paper is jammed in the product. Remove the
jammed paper, then press the  start button to clear the
error. |
| (W-10) |
Ink cartridges are installed incorrectly.
Replace or reinstall the cartridge indicated on the LCD
screen. |
| (W-12) |
An ink cartridge indicated on the LCD screen is
not recognized. Replace the ink cartridge. Epson recommends using
genuine Epson ink cartridges. |
| (E-10) |
An ink pad needs service. The ink pad is at the
end of its service life. Turn off the product and contact Epson for
support. |
| (W-13) |
An ink pad is nearing the end of its service
life. Contact Epson for support. (To continue printing, press the
start button.) |
| (E-02) |
A fatal scanner error has occurred. Turn the
product off and then back on again. If the error continues, contact
Epson for support. |
| (I-22) |
To establish a wireless connection using an
access point, press the button on the access point or click the
button on the access point's wireless settings screen displayed on
your computer screen. |
| (I-23) |
Enter the PIN code displayed on the LCD screen
into the access point or computer within two minutes. If you wait
longer than two minutes, a time-out error occurs, the code changes,
and you must enter a new code. |
| (I-32) |
To make wireless connection settings from your
computer, insert your product CD into your computer and follow the
on-screen instructions. |
| (I-60) |
Your computer may not support WSD (Web Services
for Devices). The Scan to PC (WSD) function is available only for
computers running English versions of Windows 7 or Windows
Vista. |