Selecting Wireless Network Settings From the Control Panel

You can select or change wireless network settings using your product control panel.

To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD. The installer program guides you through network setup.

  1. Press the  home button.
  2. Press the arrow buttons to select Setup and press the OK button.
  3. Press the arrow buttons to select Wi-Fi Settings and press the OK button.
  4. Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen:


  5. Select Wi-Fi Setup Wizard and press the OK button.
  6. Press the arrow buttons to select the name of your wireless network and press the OK button. If you don't see your wireless network's name, you can enter it manually.
    Note: To enter the wireless network name manually, select Other SSIDs and press the OK button. Enter your network name as described in the next step.
  7. Enter your wireless password (or network name and then password).


    • Press the arrow buttons to highlight a character or a function button displayed on the keypad. Then press the OK button to select it.
    • To change the case of letters or select symbols, select AB12 (uppercase), ab12 (lowercase), or Symbol and press the OK button. Then highlight a number or symbol and press the OK button to select it.
    • To enter a space, select Space and press the OK button.
    • To delete characters, select the back arrow and press the OK button.
    • When you finish entering characters, select Done and press the OK button.
  8. If you want to print a network setup report, press the  start button. (Otherwise, press the  stop button.)
  9. Press the  home button to exit. The WiFi light should now be on, but not flashing.
    Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Setting Up the Control Panel