Paper out |
No paper is loaded. Load paper in the
product |
Paper jam |
Paper is jammed in the product. Remove the
jammed paper, then press the start button to clear the
error. |
Combination of IP address and subnet mask is
invalid |
There is a problem with the network connection
to your product. |
A printer's ink pad is at the end of its
service life |
The ink pad is at the end of its service life.
Turn off the product and contact Epson for support. |
A printer's ink pad is nearing the end of its
service life |
The ink pads are near the end of their service
life. Contact Epson for support. (To continue printing, press the
start button.) |
Communication error |
Make sure the computer is connected to your
product and your software is installed correctly. |
Operation canceled. No memory card
recognized. |
Make sure the memory card is inserted correctly
and meets the specifications for your product. |
Recovery mode |
An error has occurred during firmware updating.
Connect your product using a USB cable and try updating the
firmware again. If you still receive this error message, contact
Epson for support. |
Printer error |
A fatal error has occurred. Turn the product
off and then back on again. If the error continues, check for a
paper jam. If there is no paper jam, contact Epson for
support. |