You can copy
color or black-and-white photos onto specific sizes and types of
paper, including Epson special papers, for instant photo reprints.
You can also restore the colors in faded photos as you copy.
Place
your original photo on the scanner glass.
Load the
paper you want to print on.
Note: Load only
the recommended number of sheets.
Press
the Home button, if necessary.
Press
the arrow buttons to select Copy and
press the OK
button. You see this screen:
Press
the Menu button, select Copy/Restore Photos, and press the
OK button. You see this
screen:
To
restore colors in faded photos as you copy, select On. If your photo or photos are not faded, leave
this setting off. Then press the OK button.
After
you read the message, press the OK button to see how to place one or two
photos on the scanner glass.
Place
one or two photos on the glass as shown on the LCD screen. For
multiple photos, place them at least 0.2 inch (5 mm)
apart.
Press
the OK button to
prescan your photo or photos.
When you
see your scanned image on the LCD screen, you can do one of the
following:
To print more
than one copy of the photo, press the + or – button to select the number (up to
99).
To crop or
zoom into your photo, press the Display/Crop button.
If you're
copying more than one photo, press the arrow buttons to select the
next photo. Then repeat the selections above.
Press
the OK button to
continue. You see a screen like this:
To change any of the settings displayed on the LCD screen, press
the Menu button, select Paper and Copy Settings, press the
OK button, and select
the necessary settings.
When you
are finished selecting your settings, press the Menu button.
When you
are ready to print, press the Start button.
Note: To cancel
printing, press the Stop/Clear
Settings button.