Green |
Off |
Off |
Normal operation. |
Flashing green |
Off |
Off |
Warming up. Wait for an image to appear. |
Orange |
Off |
Off |
Standby or sleep mode. |
Flashing orange |
Off |
Off |
Shutting down. (When the light remains orange,
you can unplug the projector.) |
Flashing red |
Off |
Flashing orange |
Projector is too hot.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
Make sure
the environmental temperature is not too hot.
|
Red |
Off |
Red |
Projector has overheated and turned off. Leave
it turned off to cool down. Once the Temp light turns off and the
power light turns orange (after about five minutes), try the
suggestions below:
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Red |
Flashing red |
Off |
Lamp has a problem.
-
Check to
see if the lamp is burned out, broken, or installed incorrectly.
Reseat or replace the lamp as necessary.
-
Clean or
replace the air filter.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Light status varies |
Flashing orange |
Off |
Replace the lamp soon to avoid damage. Do not
continue using the projector. |
Red |
Off |
Flashing red |
A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson for help. |
Red or flashing red |
Flashing red |
Flashing red |
Internal projector error. Turn the projector
off, unplug it, and contact Epson for help. |