If
your computer meets the system requirements, you can send video and
audio output to the projector through the computer's USB port
(preferably USB 2.0). Connect the projector to your computer using
a USB cable.
Turn on your computer.
Connect the cable to your projector's USB-B port.
Connect the other end to any available USB port on your
computer.
Do one of the following:
Windows
8.x: Click EPSON_PJ_UD in the
upper right-corner, then select Run
EMP_UDSE.EXE in the dialog box that appears to install the
Epson USB Display software.
Windows
7/Windows Vista: Select Run
EMP_UDSE.EXE in the dialog box that appears to install the
Epson USB Display software.
Windows XP: Wait as messages appear
on your computer screen and the projector installs the Epson USB
Display software on your computer.
Windows
2000: Select Computer,
EPSON_PJ_UD, and EMP_UDSE.EXE to install the Epson USB Display
software.
Mac OS X: The USB Display setup
folder appears on your screen. Select USB
Display Installer and follow the on-screen instructions to
install the Epson USB Display software.
Follow any on-screen instructions. You need to install this
software only the first time you connect the projector to the
computer.
Note: If you are
using Windows XP or Windows 2000 and you see a message asking if
you want to restart your computer, select No.
The
projector displays the image from your computer's desktop and
outputs sound, if your presentation contains audio.
