If the projected image is fuzzy or blurry, try the
following solutions:
Adjust the
image focus.
Clean the
product's lenses.
Note: To avoid
condensation on the lenses after bringing the product in from a
cold environment, let the product warm up to room temperature
before using it.
Position
the projector close enough to the screen, and directly in front of
it.
If you are
projecting from a computer, press the Auto button on the remote control to
automatically adjust the tracking and sync.
Repeat the
Screen Fit process to superimpose the projectors' images. See your
Setup Guide for instructions.
If you are
projecting from a computer, use a lower resolution.