Selecting Borderless Print Settings

Select a paper size with Sheet Feeder - Borderless (Auto Expand), Sheet Feeder - Borderless (Retain Size), Manual-Rear - Borderless (Auto Expand), or Manual- Rear - Borderless (Retain Size) as the Paper Size setting in the Page Setup window. You can select from the following paper sizes:

Letter (8.5 × 11 in)

US B (11 × 17 in)

US C (17 × 22 in)

A4 (210 × 297 mm [8.3 ¥ 11.7 in])

A3 (297 × 420 mm [11.7 ¥ 16.5 in])

Super A3 (13 × 19 in)

A2 (420 × 594 mm [16.5 ¥ 23.4 in])

3.5 × 5 in (89 × 127 mm)

4 × 6 in (102 × 152 mm)

5 × 7 in (127 × 178 mm)

16:9 wide size (4 ¥ 7.1 in [102 × 181 mm])

8 × 10 in (203 × 254 mm)

10 × 12 in (254 × 305 mm)

11 × 14 in (279 × 356 mm)

16 × 20 in (406 × 508 mm)

Note:

If your application has margin settings, make sure they are set to zero before printing.

Ink may spray on the platen of the printer. If this happens, wipe the ink away using a cloth.

Printing with this feature takes longer than normal printing.

Smearing may occur at the top and bottom edges of the printout depending on the media.

Borderless printing is not available when the PAPER SIZE CHECK setting is turned off. Make sure that ON is selected for PAPER SIZE CHECK on the printer’s control panel.

Follow the steps below to print borderless photos.

Note:

Always select the same printer in the Format for pop-up menu (in the Page Setup window) and the Printer pop-up menu (in the Print window); otherwise, your images may not be printed correctly.

Select a paper size with Sheet Feeder - Borderless (Auto Expand), Sheet Feeder - Borderless (Retain Size), Manual-Rear - Borderless (Auto Expand), or Manual-Rear - Borderless (Retain Size) as the Paper Size in the Page Setup window.

Click OK.

Start printing your image from your application.