EPSON

Scanning in Office Mode

When you select Office Mode, you see the Epson Scan Office Mode window.
Place the original(s) on the document table. See Placing Documents or Photos for instructions.
Note:
You cannot scan film in Office Mode.
Start Epson Scan. See Starting Epson Scan for instructions.
Select Office Mode in the Mode list. See Changing the Scan Mode for instructions.
Select Color, Grayscale, or Black&White as the Image Type setting.
Note:
If you select Grayscale or Black&White, you can also select an Image Option setting, as described below. Changes made here can be seen in the preview window.
Image Option Setting
Description
None
No Image Option setting is applied.
Dropout: Red
Drops out red from the scan.
Dropout: Green
Drops out green from the scan.
Dropout: Blue
Drops out blue from the scan.
Color Enhance: Red
Enhances red in the scan.
Color Enhance: Green
Enhances green in the scan.
Color Enhance: Blue
Enhances blue in the scan.
Select Document Table as the Document Source setting.
Select the size of your original document as the Size setting. (You must select the size before opening a preview image.)
Click the arrow to open the Resolution list and select an appropriate resolution for your original. See Selecting the Scan Resolution for instructions.
Click Preview to preview your image(s). The Preview window appears and displays your image. See Previewing and Adjusting the Scan Area for instructions.
If the image appears slanted, click the Configuration button, select the Other tab, click the Correct Document Skew check box, and click OK.
Modify the image quality if necessary. See Adjusting the Color and Other Image Settings for instructions.
Click Scan.
What happens next depends on how you started your scan. See Finishing the Scan for instructions.