Transportation

If you need to ship your R1900 Series or transport it a long distance, prepare it for transportation as follows:

1.	Turn off the R1900 Series.

2.	Unplug all the connected cables.

3.	Remove all the paper and paper loading accessories.

4.	Close the paper support and output tray.

5.	Lift up the printer cover and check that the ink cartridge holder is all the way to the right (the home position). If necessary, plug in and turn on the R1900 Series, then turn it off again using the  power button.

6.	Fasten the ink cartridge holder to the case using tape. Leave the ink cartridges installed to avoid damaging the printer.

7.	Close the printer cover, then fasten the output tray to the case using tape.

8.	Pack the R1900 Series and its accessories in its original box or one of a similar size using protective material to keep it from moving inside the box.

9.	Keep the R1900 Series level during transportation to prevent damage.

10.	After unpacking the R1900 Series, remove the tape securing the ink cartridge holder and output tray.

If print quality has declined when you print again in a new location, clean and align the print head.