Reference Guide
|
|
Product Information / Product Specifications
System Requirements
Windows System Requirements
To use your Stylus Photo RX600 and its software, your system should have:
- Microsoft® Windows® compatible PC with Pentium® 300 MHz or better processor
- Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
- 256 MB RAM (512 MB or more of RAM recommended)
- At least 200 MB of free hard drive space (300 MB or more recommended)
- CD-ROM or DVD drive for installing the software
- Windows-compliant built-in USB port and USB cable that came with your Stylus Photo RX600 (USB 2.0 recommended)
Macintosh System Requirements
To use your Stylus Photo RX600 and its software, your system should have:
- iMac® or eMac™ series, Power Macintosh®
G3, G4, or G5, PowerBook®, or iBook™
- Mac® OS 9.x or OS X 10.2.x - 10.3.x (Mac OS 9.1 or later
recommended)
- At least 256 MB of RAM for OS 9 (512 MB reommended); 512 MB or more required for OS X
- At least 200 MB of free hard drive space (300 MB or more recommended)
- CD-ROM or DVD drive for installing the printer software
- Built-in USB port and the USB cable that came with your Stylus Photo RX600 (USB 2.0 recommended)
|
Note:
|
| -
For Mac OS 8.6 to 9.x, the memory requirements above are for printing on Letter size paper. These requirements may vary depending on the size of the paper, the type of application you are using, and the complexity of the document that you want to print.
|
|
In addition to these system and memory requirements, you need 20 MB of free hard disk space to install your printer software. To print, you also need extra hard disk space amounting to about twice the size of the file that you want to print.
[Top]
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |