|
|
Product Information / Product Specifications
For PCs
For Macintosh computers
To use your Stylus Scan, you need Microsoft® Windows® 95, or Windows® 98; a CD-ROM drive and a shielded, twisted-pair parallel cable. If you want to connect your Stylus Scan to a USB port, you need a Windows 98 pre-installed PC equipped with a USB port; and a shielded USB cable.
Your computer should also meet the following system requirements.
Minimum System Requirements |
Recommended System |
i486/25 MHz for Windows 95 |
Pentium or higher processor |
32 MB RAM |
32 MB RAM or more for Windows 98 and 95 |
50 MB hard disk space for Windows 98, and 95 |
50 MB or more free disk space for Windows 98, and 95 |
VGA size, 16 bit color |
SVGA or better 24 bit color |
Your computer dealer can help you update your system if it does not meet these requirements.
You can use this Stylus Scan with the following Apple® Macintosh® computers. You also need a shielded USB cable.
Any Macintosh with a standard USB interface.
Your Macintosh must meet the following system requirements.
Minimum System Requirements |
Recommended System |
System 8.1 + iMac update 1.0 |
System 8.5.1 or later |
7 MB of available memory |
14 MB or more of available memory |
Note: |
|
|
In addition to these system and memory requirements, you also need 10 MB of free hard disk space to install the Stylus Scan software. To print, you need extra hard disk space amounting to about double the size of the file you want to print.
Previous |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |