Transportation

If you need to ship your WorkForce 310 Series or transport it a long distance, prepare it for transportation as follows:

1.	Turn off the WorkForce 310 Series.

2.	Remove all the paper.

3.	Close the paper support and output tray.

4.	Lift up the scanner and check that the ink cartridge holder is all the way to the right (the home position). If necessary, turn on the WorkForce 310 Series, wait until the print head locks into the home position, then turn it off again.

5.	Fasten the ink cartridge holder to the case using tape. Leave the ink cartridges installed to avoid damaging the printer.

6.	Close the scanner.

7.	Unplug all the connected cables.

8.	Pack the WorkForce 310 Series in its original box or one of a similar size using protective material to keep it from moving inside the box.

9.	Keep the WorkForce 310 Series level during transportation to prevent damage.

10.	After unpacking the WorkForce 310 Series, remove the tape securing the ink cartridge holder.

If print quality has declined when you print again in a new location, clean and align the print head.