Loading Paper for Photos

You can print photos on a variety of paper types and sizes.
  1. Close the output tray, if necessary.


  2. Pull out the paper cassette.


  3. Slide the edge guides outward.


  4. Slide the edge guide shown below to your paper size.


  5. Load photo paper, printable side down, against the edge guide as shown.


    Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette.


  6. Slide the edge guides against the paper, but not too tight.
    Note: Make sure the paper fits beneath the top edges of the guide.
    Caution:
    To prevent paper feeding problems, make sure you do not load too much paper in the cassette.
  7. Gently replace the paper cassette.


    Note: The paper may slide forward slightly as you insert the cassette. This is normal.
  8. Extend the output tray and open the paper stopper.


    Always follow these paper loading guidelines:
    • Load only the recommended number of sheets.
    • Load paper short edge first, no matter which way your document faces.
    • Do not load paper above the arrow mark inside the edge guide.
    • Check the paper package for any additional loading instructions.
Related references
Paper Loading Capacity