Fax a Document or Photo : Set Up Your Fax Features

Select Communication Settings
Use these settings to change how your WorkForce 610 Series receives and transmits faxes.
1.
Press the Home button.
2.
3.
4.
Press or to select Fax Setting, then press OK. You see this screen:
5.
Press or to select Communication, then press OK.
6.
DRD
All (default)
Single
Double
Triple
Double & Triple
This feature can be used with a “Distinctive Ring Service” provided by your phone company. With this service, you can have two or more phone numbers assigned to the same line, with each number given a distinctive ring. For example, if you have a phone number for personal calls that’s set to ring normally (with a single ring) and a fax number set for a double ring, select Double as the DRD setting. Then the fax system picks up only those calls with a double ring.
ECM
On (default)
Off
Indicates whether you use Error Correction Mode to automatically request retransmission of fax data that is received with detected errors.
V.34
On (default)
Off
Indicates the speed at which you transmit faxes.
On is 33.6 Kbps and Off 14.4 Kbps.
Rings to Answer
4 (default)
1, 2, 3, 4, 5, 6, 7, 8, or 9
Indicates the number of rings that must occur before the WorkForce 610 Series automatically receives a fax. You may want to change this setting if you have connected a telephone or answering machine.
Dial Tone Detection
Off
On (default)
When this setting is on, the WorkForce 610 Series dials automatically when it detects a dial tone.
It may not be able to detect a dial tone when connected to a PBX (Private Branch Exchange) or TA (Terminal Adapter) system. In that case, turn this setting off.