Transportation

If you need to ship your product or transport it a long distance, prepare it for transportation as described below.

Caution:
When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak.
Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.
Do not carry the product by the control panel; this may damage the product.

When storing this product in a box, place it so that the control panel does not get damaged.

1.	Turn off the product.

2.	Lift up the scanner and check that the print head is all the way to the right (the home position). If necessary, turn on the product, then turn it off again. Leave the ink cartridges installed.

3.	Lower the scanner.

4.	Remove all the paper from the cassette, and reinsert the cassette.

5.	Unplug all the connected cables.

6.	Close the output tray.

7.	Press the release bar underneath the control panel, and lower the control panel all the way down.

8.	Pack the product in its original box or one of a similar size using protective material to keep it from moving inside the box.

9.	Keep the product level during transportation to prevent damage.

If print quality has declined when you print again in a new location, clean and align the print head.