Selecting Wireless Network Settings From
the Touch Panel
You can
select or change wireless network settings using your product touch
panel.
To install your product on a wireless network, follow the
instructions on the Start Here sheet and install the
necessary software from the product CD. The installer program
guides you through network setup.
Press
the home button, if
necessary.
Press
the arrow buttons and then select Setup.
Press
the arrow buttons and then select Network
Settings.
Select
Wireless LAN Setup. You see
this screen:
Select
Setup Wizard.
Note: If you need
to disable the wireless network to set up your product on an
Ethernet network, press the arrow buttons and select Disable Wireless LAN instead. Then follow the
instructions on the Start Here sheet to set up your
product on a wired network and install the necessary software from
the product CD. The installer program guides you through network
setup.
Select
the name of your wireless network or enter the name
manually.
Note: To enter the
wireless network name manually, press the arrow buttons and then
select Other SSIDs. Use the
displayed keypad to enter your network name, as described in the
next step.
Enter
your wireless password (or network name and then password) using
the displayed keypad.
Press the up
or down arrow buttons to select a character.
Press the
left or right arrow buttons to move the cursor to the previous or
next space.
Press the
menu button to select uppercase
letters (ABC), lowercase letters (abc), or numbers (123) and
symbols (*!#&).
To delete
characters, select .
When you
finish entering characters, press the OK button.
Confirm
the displayed network settings and press the OK button to save them.
Note: If you need
to change a setting, press the back button.
If you
want to print a network setup report, press the start button. (Otherwise,
select Cancel.)
Press
the home button to exit. The
WiFi light should now be on, but not flashing.
Note: If the
WiFi light is off, you may have selected the wrong
network name or entered the password incorrectly. Repeat these
steps to try again.