You can load
photo paper and other media in these sizes in the upper paper
cassette:
- 3.5 × 5 inches (89 × 127 mm)
- 4 × 6 inches (102 × 152 mm)
- 5 × 7 inches (127 × 178 mm)
- A6 (4.1 × 5.8 inches [105 × 148 mm])
- 16:9 wide (4 × 7.1 inches [102 × 181 mm])
Note: Do not
remove or insert the paper cassette during printing.
- Close
the output tray, if necessary.
Note: As you slide in the output tray, there may be slight resistance and noise. This is normal.
- Open the front cover.
- Pull out
the upper paper cassette. The upper cassette has a
label on the
right side.
- Slide the edge guides outward.
- Set the
front edge guide to the position for the paper size you are
using.
Note: Various paper sizes are marked on the tray.
- Insert
paper with the glossy or printable side facedown.
Note: Make sure the paper is loaded against the front edge guide.
- Slide
the side edge guides against the paper, but not too tightly.
Note: Make sure the paper is under the tabs on the edge guides.
-
Keep the cassette flat as you insert it.
Note: The output tray opens automatically when you print. Leave enough space in front of the product for the paper to be fully ejected. Do not remove or insert the paper cassette while the product is operating.
