Setting Up Crestron RoomView Support

To set up your projector for monitoring and control using a Crestron RoomView system, make sure your computer and projector are connected to the network. If you are connecting wirelessly, set up the projector using the Advanced network connection mode (PowerLite 1945W/1955/1965).
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select Network Configuration and press Enter.
  4. Select the Others menu (PowerLite 1940W/1950/1960) or the Administrator Setting menu (PowerLite 1945W/1955/1965) and press Enter.

    PowerLite 1940W/1950/1960



    PowerLite 1945W/1955/1965



  5. Set the Crestron RoomView setting to On to allow the projector to be detected.
  6. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen instructions to save your settings and exit the menus.
  7. Turn off the projector, then turn it on again to enable the setting.
Parent topic: Crestron RoomView Support