Setting Up Crestron RoomView Support

To set up your projector for monitoring and control using a Crestron RoomView system, make sure your computer and projector are connected to the network.
Note: If you want to use the Crestron RoomView system when the projector is turned off, you need to adjust the Standby Mode settings in the Extended menu.
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select Network Configuration and press Enter.
  4. Select the Others menu (PowerLite Pro G6800/G6900WU) or the Administrator Setting menu (PowerLite Pro G6050W/G6150/G6450WU/G6550WU/G6750WU) and press Enter.

    PowerLite Pro G6800/G6900WU



    PowerLite Pro G6050W/G6150/G6450WU/G6550WU/G6750WU



  5. Set the Crestron RoomView setting to On to allow the projector to be detected.
    Note: Enabling Crestron RoomView disables the Epson Message Broadcast feature in the EasyMP Monitor software.
  6. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen instructions to save your settings and exit the menus.
  7. Turn off the projector, then turn it on again to enable the setting.
Parent topic: Crestron RoomView Support