Loading Envelopes in the Cassette
You can print on plain paper envelopes in this size:
No. 10 (4.1 × 9.5 inches [105 × 241 mm])
.
You can load No. 10 size envelopes in Cassette 1 only.
Close the paper stopper and output tray, if necessary.
Pull out the paper cassette
and remove the paper cassette cover
.
Slide the edge guides outward.
Load envelopes printable side down and flap edge right as shown.
Slide the edge guides against the envelopes, but not too tightly.
Note:
Make sure the envelopes are loaded against the edge guide and not sticking out from the end of the cassette.
Caution:
To prevent paper feeding problems, make sure you do not load too many envelopes in the cassette.
Close the paper cassette cover and gently insert the paper cassette.
Note:
The envelopes may slide forward slightly as you insert the cassette. This is normal.
When prompted by the product's LCD screen, select
Envelope #10
for the Paper Size and
Envelope
for the Paper Type, and
press the
OK
button
.
Extend the output tray and open the paper stopper.
Always follow these envelope loading guidelines:
If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
If print quality declines when printing multiple envelopes, try loading one envelope at a time.
Do not load envelopes that are curled, folded, or too thin.
Parent topic:
Loading Paper
Related tasks
Loading Paper and Envelopes in the Rear Feed Slot
Loading Paper for Documents in the Cassette
Related references
Paper Loading Capacity