If EpsonNet Setup cannot find your product on a
network, try these solutions:
- Make sure
your product is turned on and connected to your network. Verify
connection using your product control panel.
- Check if
your network name (SSID) contains non-ASCII characters. Your
product cannot display non-ASCII characters.
- If
necessary, reinstall your product software and try running EpsonNet
Setup again:
- Reset your
product's network settings to their factory defaults.
- Windows
only: uninstall your product software.
- Initialize
your router following the instructions in your router
documentation.
Note: If you
are reading these instructions online, you will lose your internet
connection when you initialize your router, so note the next step
before initializing it.
- Download
your product software from the Epson website, or install it from
the CD that came with your product using the instructions on the
Start Here sheet.
- If you have
replaced your router, reinstall your product software to connect to
the new router.