The power light is on |
The printer is turned on. |
The power light is flashing |
The printer is busy. Wait for the
power light to stop flashing
before turning off the printer. |
The WiFi/Ethernet light is
lit |
The printer is connected to the network. |
The maintenance box light is
on |
The maintenance box is at the end of its
service life or not installed. Press the black cleaning and
color cleaning buttons at the
same time to clear the error, then install or replace the
maintenance box. |
The maintenance box light is
flashing |
The maintenance box is near the end of its
service life. Make sure you have a replacement maintenance
box. |
The paper light is on |
Paper may be out. Load more paper in the
cassette or rear MP tray and press the paper feed button to
continue. |
If multiple sheets have fed, press the
paper feed button to eject
the paper. |
The paper size selected may not match any of
the sizes set for the paper sources. Press the paper feed button to clear
the error, and select the right paper size. |
If the paper cassette is not installed,
install it and press the paper feed button. |
The paper light is flashing |
Paper has jammed in the printer. Check in the
cassette, inside the printer, and in the duplexer to remove the
jammed paper. Then press the paper feed button to clear
the error. |
The power and paper light are flashing |
The front cover is open. Close the cover. |
An ink out light is on |
The indicated ink pack is expended. Contact
Epson. |
An ink out light is
flashing |
The indicated ink pack is low. Contact
Epson. |
All lights are flashing |
Printer error. Check in the cassette, inside
the printer, and in the duplexer to remove the jammed paper. Turn
the printer off and then back on again. If the error does not
clear, contact Epson. |
The yellow ink out light is
flashing |
The firmware update has failed, and the
printer is in recovery mode. Contact Epson for instructions on
repeating the firmware update. |