You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note: Available
settings depend on the current input source. The lamp usage timer
does not register any hours until you have used the lamp for at
least 10 hours.
| Information item | Description |
|---|---|
| Lamp Hours | Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon |
| Source | Displays the name of the port to which the current input source is connected |
| Input Signal | Displays the input signal setting of the current input source |
| Resolution | Displays the resolution of the current input source |
| Video Signal
(PowerLite S18+/W18+/X24+) |
Displays the video signal format of the current input source |
| Refresh Rate | Displays the refresh rate of the current input source |
| Sync Info | Displays information that may be needed by a service technician |
| Status | Displays information about projector problems that may be needed by a service technician |
| Serial Number | Displays the projector's serial number |
| Event ID | Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes |