Projector Light Status

The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.



1 Status light
2 Lamp light
3 Temp light
4 Power light
Power light Status light Lamp light Temp light Status and solution
Blue Blue Off Off Normal operation
Blue Flashing blue Off Off Warming up; wait for an image to appear
Off Off Off Off Standby or sleep mode
Blue Flashing blue Off Off Shutting down; when the Status light stops flashing, you can unplug the projector
Flashing blue Varies Off Flashing orange Projector is too hot
  • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects
  • Clean or replace the air filter
  • Make sure the environmental temperature is not too hot
Off Flashing blue Off Orange Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following:
  • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects
  • Clean or replace the air filter
  • If operating the projector at high altitude, turn on High Altitude Mode
  • If the problem persists, unplug the projector and contact Epson for help
Off Flashing blue Orange Off Lamp has a problem
  • Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary
  • Clean or replace the air filter
  • If operating the projector at high altitude, turn on High Altitude Mode
  • If the problem persists, unplug the projector and contact Epson for help
Flashing blue Varies Flashing orange Off Replace the lamp soon to avoid damage; do not continue using the projector
Off Flashing blue Off Flashing orange A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help
Off Flashing blue Flashing orange Flashing orange Auto Iris error; turn the projector off, unplug it, and contact Epson for help
Off Flashing blue Orange Orange Power error (ballast); turn the projector off, unplug it, and contact Epson for help
Off Flashing blue Flashing orange Off Internal projector error; turn the projector off, unplug it, and contact Epson for help
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.
Related tasks
Cleaning the Air Filter
Replacing the Lamp
Replacing the Air Filter
Related references
Projector Setup Settings - Extended Menu