Setting Up Network Scanning

You can set up network scanning to your scanner through the optional Epson Network Interface Unit. First connect the unit to your scanner and verify that they are working properly. Then follow the instructions here to set up computers for network scanning using the Epson Scan Settings utility.

Note: Make a note of the IP address or host name of the Network Interface Unit so you can enter it in these steps.

Do one of the following to start Epson Scan Settings:
- Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings.
- Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings.
Select your scanner from the Select Scanner list.
Select the Network setting and click the Add button. You see this screen:
Do one of the following:
- Under Search for addresses, select the IP address of your Network Interface Unit, and click OK.
- Select the Enter address setting and type in the IP address or host name of your Network Interface Unit. Then click OK.
Click the Test button to check the connection. You see a confirmation message.
Click OK to save your settings and close Epson Scan Settings.