If you have problems scanning using the optional Network Interface Unit, try these solutions:
- Make sure the Network Interface Unit is securely connected to the network or your computer and the scanner with a working cable.
- Make sure your scanning software is installed correctly and that you have selected the correct settings for the program you are using.
- Check that the IP address for the scanner is correct in the Epson Scan Settings utility.
- If you are
scanning with Document Capture Pro, check the following:
- Make sure the Group settings are the same as the Network Interface Unit settings. See the Document Capture Pro Help utility, and the Network Interface Unit User's Guide for details.
- With Windows, make sure the program is not being blocked by a network firewall. If so, you can unblock the EEventManager Application program in the Windows security settings; see Windows help for details.
- If the scanner is connected to the Network Interface Unit, the
numeric display on the scanner shows
and you cannot select a
scanning job from the display.