Setting Up Network Scanning

You can set up network scanning using one of these methods:

Note: Make a note of the IP address or host name of the Network Interface Unit or scanner so you can enter it in these steps.
  1. Do one of the following:
    • Manually configure your scanner to connect to your network
    • Connect the Epson Network Interface Unit to your scanner and verify they are working properly.
  2. Do one of the following to start Epson Scan Settings:
    • Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings.
    • Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings.
    • OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings.
  3. Select your scanner from the Select Scanner list.
  4. Select the Network setting and click Add. You see a screen like this:


  5. Do one of the following:
    • Under Search for addresses, select the IP address of your Network Interface Unit or scanner, and click OK.
    • Select the Enter address setting, type in the IP address or host name of your Network Interface Unit or scanner, and click OK.
  6. Click the Test button to check the connection. You see a confirmation message.
  7. Click OK to save your settings and close Epson Scan Settings.
Parent topic: Connecting to an Existing Wi-Fi Network