| The Status light is on |
The scanner is turned on and ready to
scan. |
| The Status light is flashing blue |
The scanner is scanning or initializing. Wait
for the Status light to
stop flashing before turning off the scanner. |
| The ! error light is on |
An error has occurred. Try the following:
- Check the
scanner connection to your computer to make sure it is secure.
- Make sure
the scanner cover is closed and there is no jammed paper
inside.
- If the
! error light is
still on, turn off the scanner, then turn it on again. If the error
continues, the scanner may be malfunctioning. Contact Epson for
support.
|
| The ! error light and the
Status light (blue) are
flashing alternately |
The scanner firmware is updating. Do not turn
off the scanner or disconnect any cables until the status lights
have stopped flashing. |
| The ! error light and the
Status light are
flashing at the same time |
A paper jam or a double feed has occurred.
Remove any paper loaded in the input tray. If the lights continue
to flash, a scanner error may have occurred. Turn the scanner off
and then back on again. If the error continues, contact Epson for
support. |
| The Status light is flashing white |
The scanner is connecting to a wireless
network. |
| The ! error light and the
Status light (white)
are flashing alternately |
The product is in a standby state for Wi-Fi
Protected Setup (WPS) connection or the firmware is being
updated. |
