Preparing the Pre-treatment Solution

Prepare the pre-treatment solution for application to the T-shirts.

  1. To attach the tap, cut the cardboard along the perforations and remove the tap from inside the cardboard box.


  2. Pull the cap section out of the hole in the cardboard.


    Note: Make sure you pull the cap section out of the hole in the cardboard. If the cap is opened without being pulled out, the pre-treatment solution may spill out.
  3. Remove the cap.


  4. Remove the tap from the bag and turn the tap's handle section until the hole is visible as shown.


    Note: If you cannot see the hole or if the tap is damaged, contact Epson.
  5. Attach the tap.


  6. Remove the cap from the tap and turn the lever until the hole is facing down.


  7. To pour the solution, tip the cardboard or the container and pour the pre-treatment solution into the desired container.
  8. When you have finished pouring the solution, put the cap back on the tap.
  9. Store the cardboard box with the tap side facing up.
Parent topic: Pre-treating a T-shirt