You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note: Available
settings depend on the current input source. The laser usage timer
does not register any hours until you have used the laser for at
least 10 hours.
| Information item | Description |
|---|---|
| Operation Hours | Displays the number of hours (H) the laser has been used |
| Source | Displays the name of the port to which the current input source is connected |
| Input Signal | Displays the input signal setting of the current input source |
| Resolution | Displays the resolution of the current input source |
| Scan Mode | Displays the scan mode |
| Refresh Rate | Displays the refresh rate of the current input source |
| 3D Format | Displays the 3D format of the signal (Frame Packing, Side-by-Side, or Top and Bottom) |
| Sync Info | Displays information that may be needed by a service technician |
| Deep Color | Displays Deep Color bit depth information |
| Video Signal | Displays the video signal format of the current input source |
| Status | Displays information about projector problems that may be needed by a service technician |
| Serial Number | Displays the projector's serial number |
| Version | Displays the projector's firmware version |